Product ID: BND-IPX56A
IP Rating:IPX5 IPX6
Origin: China
Delivery time: 25-35 work days.
Package:Plywood case
Warranty:12 months.
Product description:Tests for ratings IPX5 and IPX6 address ingress from a jetting water stream tests for these ratings are conducted using a Jet Nozzle Kit. Testing to IPX6 also requires a water tank and a high pressure water source. IPX56 powerful water Jet test equipment is designed according to IEC60529 (also EN 60529) liquid ingress protection IPX5 and IPX6, which is mainly used for testing the resistibility of electro-technical products against water and determining IP protection types.
Product Features
1.Test room made of corrosion-resistant steel.
2.The electrical parts of the turntable are well-sealed so as to avoid electrical hazards caused by water
3.The turntable rotates clockwise alternating with anticlockwise, which is convenient to a electric specimen.
4.Water jet testing time is controlled by a time relay, which is easy to operate and service
5.Built-in water tank with flow control valve and low water level alarm.
6.IPX5 water jet test and IPX6 powerful water jet test mode could be switched with the dedicated button.
7.Automatic shutdown after the water proof test.
8. All specifications are fully in accordance with IEC60529.
9. ISO 17025 / ILAC calibration certificate available. (with extra cost)
Reference
According to IEC60529: Degrees of protection provided by enclosures(IP Code)
Test for second characteristic numeral 5 with the 6,3 mm nozzle (IPX5)
The test is made by spraying the enclosure from all practicable directions with a stream of water from a standard test nozzle as shown in figure 6.
The conditions to be observed are as follows:
– internal diameter of the nozzle: 6,3 mm;
– delivery rate: 12,5 l/min ± 5 %;
– water pressure: to be adjusted to achieve the specified delivery rate;
– core of the substantial stream: circle of approximately 40 mm diameter at 2,5 m distance from nozzle;
– test duration per square metre of enclosure surface area likely to be sprayed: 1 min;
– minimum test duration: 3 min;
– distance from nozzle to enclosure surface: between 2,5 m and 3 m
Test for second characteristic numeral 6 with the 12,5 mm nozzle (IPX6)
The test is made by spraying the enclosure from all practicable directions with a stream of water from a standard test nozzle as shown in figure 6.
The conditions to be observed are as follows:
– internal diameter of the nozzle: 12,5 mm;
– delivery rate: 100 l/min ± 5 %;
– water pressure: to be adjusted to achieve the specified delivery rate;
– core of the substantial stream: circle of approximately 120 mm diameter at 2,5 m distance from nozzle;
– test duration per square metre of enclosure surface area likely to be sprayed: 1 min;
– minimum test duration: 3 min;
– distance from nozzle to enclosure surface: between 2,5 m and 3 m.
IEC60529 Figure 6 – Test device to verify protection against water jets (hose nozzle)
Calibration Certificate
* Tips for calibration
1. This is ISO 17025 / ILAC calibration certificate issued by third party lab.
2. It is with extra cost and takes around 7 work days for calibration.
3. Suggested recalibration interval is one year.
4. One item for one certificate and the name and address of your company will be indicated in the cover.
Product Parameters
No. | Model | BND-IPX56A
|
1 | Control System | (touch-tone)Time relay + switch
|
2 | Equipment Outer dimensions (mm) | About L1000 * D800 * H1300 (including casters) |
3 | Water storage tank capacity | 550L, a size of about 800 × 600 × 1145 (mm), 304 stainless steel |
4 | IPX5 water aperture (mm) | 6.3 |
5 | IPX6 water aperture (mm) | 12.5 |
6 | IPX5 water flow (L / min) | 12.5±0.625 |
7 | IPX5 water flow (L / min) | 100±5L/min |
8 | Water pressure (Mpa) | Prescribed water flow regulator |
9 | Flow control | Using band regulating flow meter |
10 | Spray distance | 2.5*3m (test personnel Control) |
11 | Gun fixation | Handheld |
12 | Pump | Stainless steel multi-stage pump |
13 | Waterway material | Stainless steel + PPR pipe welding |
14 | Turntable Diameter (mm) | 600 |
15 | Turntable load power | AC220V |
16 | Material | SUS304#Stainless steel |
17 | protective device | Leakage, water shortage, short circuit |
18 | Power supply(V) | 380V |
19 | Power(KW) | 3 |
20 | Standard | IEC60529:1989+A1:1999.(IPX5 IPX6) |
Product Images
(Packed by solid plywood case to avoid damages during transportation.)
FAQ
1.Payment Methods:
Q: What payment methods do you accept?
A: We accept several different payment methods, including T/T (bank transfer), credit card, PayPal, and Western Union.
Q: Can I pay with my credit card?
A: Yes, we accept most major credit cards for payment. We will create a payment link through our online business platform alibaba.com. It could be fast and convenient.
2.Shipping Methods:
Q: What shipping methods do you offer?
A: We offer several different shipping methods, including UPS, TNT, FedEx, DHL, sea shipment, and air shipment.
Q: How long does it take for my order to ship?
A: The processing time for your order may vary depending on the product and shipping method selected. Once your order has been processed, we will provide you with an estimated delivery date.
Q: Can I track my shipment?
A: Yes, we will provide you with a tracking number once your order has shipped so you can track its progress.
3.After-Sales Services:
Q: What kind of after-sales services do you provide?
A: We offer a one-year warranty on all our products. If you encounter any issues or problems with your purchase, our dedicated team will assist you in resolving them promptly and positively.
Q: How can I request after-sales support?
A: If you need assistance with your product or have any questions regarding the warranty, please reach out to our customer support team. They can be contacted via email or phone during our business hours.
Contact: Robin Zhou
Phone: +86 13352924160
E-mail: robin@szbonad.com
Whatsapp:+86 13352924160
Add: C505 Hongdu Building, Zone 45 , Baoan District, Shenzhen City, 518100, China
We chat